CA18DET Installation 5 - Cooling System               Last Updated: 27/02/2008 Leaving the fuel system behind for now (as I'm having some trouble with the concept) I thought I would mount the intercooler and radiator..... Here's what I've started with, already a little of the front panel has been cut for a previous modification (by the previous owner) Take of the front bar Check the intercooler hole I need with a cardboard template, and check my S13 radiator will fit OK too. Marked up where I wanted to cut Then got into it with the angle grinder...wanted and action shot...but cant grind and take a photo. Test fit showed I needed to take a little more material out to clear the end tanks of the intercooler. Now I need to make up some brackets to mount the cooler - then do the same for the radiator. So here's where I want the cooler   Now I want some bolts through the rad support to hold it all up.    Top done!    Now the bottom.....started with the trusty cardboard prototype   Then moved on to Aluminium    Drilled some holes    Looks like it all fits!    Now need some holes to hold the radiator    Dropped the rubber grommits straight into the drilled holes, now just need top rad brackets.