CA18DET Installation 4 - Fuel System                Last Updated: 12/08/2007 My idea for the fuel system is to run a lift pump, surge tank and EFI pump and filters in an enclosed metal box in the boot space of the coupe. As a coupe has no rear firewall, thought I'd protect the pumps with the box. I then plan to run my fuel lines in the cabin for ease and stop them getting damaged if the underside of the car hits something. Fuel System: Here's my carter black lift pump. I got smart and drew some white arrows on it to indicate flow direction (as you can't read the in and out stamps once it's mounted on its bracket) Here's the bracket - I trial fit it to some cardboard to get the idea of where to put it. Mount bracket to wall, then pump to bracket, much easier that way I found. To try and get an idea of what size enclosure I put all the other components together, surge tank, fuel filter and EFI fuel pump. With a rough size in mind I connected up all the fuel hoses to see what it would look like This finished product, also where I think it will go in the back of the coupe Now some piping to the carter to see how that fits in. Looks pretty good. So the next mission was to find a metal box to put all these pumps in. Went on a bit of a fact finding tour. With all the measurements in hand checked it out against a cardboard base to see if the smallest box would be big enough....looked OK to me Went back on bought it...looks pretty good Need to mount that Carter pump in here.... Now connect it up to the surge tank Next up is fuel pipes....as I bought a piece of shit pipe bender stuck for now - picked up a nicer one of ebay, hopefully it'll arrive soon.